• Bearing National Standard (1)

    Bearing National Standard (1)

    1. GB/T14910-1994 Technical requirements for sliding bearing thick-walled multilayer bearing backing2. GB/T16748-1997 Compression test of sliding bearing metal bearing materials3. GB/T18323-2001 Dimensions and tolerances of sliding bearing sintered bushings4. GB/T18324-2001 Sliding bearing copper al... read more

    Feb 24,2022 News
  • What are the considerations for sliding bearing design?

    What are the considerations for sliding bearing design?

    Sliding bearings are in surface contact, so a certain oil film should be maintained between the contact surfaces. Therefore, the following issues should be paid attention to when designing: 1. Make sure that the oil film can smoothly enter the friction surface. 2. The oil should enter the bearing fr... read more

    Feb 19,2022 News
  • Quality inspection of bearings

    Quality inspection of bearings

    National standard1. National standard for vibration acceleration (commonly known as Z standard) This standard was formulated earlier, to measure the vibration acceleration value when the bearing rotates to determine the quality grade of the bearing, which is divided into three quality grades from lo... read more

    Feb 09,2022 News
  • Two-way thrust angular contact ball bearings

    Two-way thrust angular contact ball bearings

    Product descriptionThe characteristic of the two-way thrust angular contact ball bearing is that it can bear the combined load of radial and axial loads at the same time, and limit the axial displacement of the shaft on both sides. It is composed of outer ring, inner ring, steel ball and cage, which... read more

    Jan 27,2022 News
  • Features, differences and corresponding uses of 14 common bearings (2)

    Features, differences and corresponding uses of 14 common bearings (2)

    11. Thrust cylindrical roller bearingsIt consists of washer-shaped raceway rings (shaft washers, seat washers), cylindrical rollers and cage assemblies. The cylindrical roller is processed with convex surface, so the pressure distribution between the roller and the raceway surface is uniform, and it... read more

    Jan 20,2022 News
  • What are the classifications of bearings?

    What are the classifications of bearings?

    Bearings are important components in mechanical equipment. Its main function is to support the mechanical rotating body to reduce the friction coefficient of the mechanical load during the transmission process of the equipment. Bearings are divided into radial bearings and thrust bearings according ... read more

    Jan 13,2022 News