ZHEJIANG BHS JOURNAL BEARING CO.,LTD. located in FengXian District of Shanghai, the company's brand "BHS", is a professional tilting pad thrust bearings manufacturers and Tilting pad bearings factory...
BHS tilting pad bearings, journal bearings,thrust pad bearings,slide bearings are use our original features to ensure optimum load distribution and trouble free operation, and also take advantage of other features such as offset pivots to achieve the best possible performance. Key features make the... read more
A contact seal is a seal that is in contact with its relative moving parts without gaps. Due to the direct contact between the seal and the mating part, the seal has a large friction and a large amount of heat during work, which is likely to cause poor lubrication and the contact surface is easy to ... read more
1. Before installing the bearing on the shaft, you must first remove the fixing pin of the bearing jacket, and at the same time, polish the surface of the journal to smooth and clean, and apply oil to prevent rust and lubrication at the journal (allow the bearing to rotate slightly on the shaft). 2.... read more
1. Use an Allen wrench to loosen the locking screw on the bearing eccentric sleeve, then use a small iron rod to insert the counterbore on the eccentric sleeve of the top cover, and loosen the eccentric sleeve against the direction of shaft rotation. 2. Loosen the bolts fixing the bearing seat. Remo... read more
Non-contact method: single lip seal Structure, function and advantages and disadvantages: The combination of steel plate and rubber is a non-contact sealing device. The outer diameter of the inner ring has a grooved spear and a sealing lip to form a labyrinth seal. It is suitable for high speed, sui... read more
First, the material of stainless steel bearings has strict chemical composition requirements. Under normal circumstances, stainless steel bearing steel is mainly high-carbon chromium stainless steel, only by strictly controlling the chemical composition of stainless steel, can its structural propert... read more