ZHEJIANG BHS JOURNAL BEARING CO.,LTD. located in FengXian District of Shanghai, the company's brand "BHS", is a professional tilting pad thrust bearings manufacturers and Tilting pad bearings factory...
Corresponding to the structural composition of rolling bearings, rolling bearings have 4 types of failure frequencies: rolling bearing cage failure frequency, rolling bearing rolling element failure frequency, rolling bearing outer ring failure frequency, rolling bearing inner ring failure frequency... read more
1. The choice of cooperation The inner diameter and outer diameter of the rolling bearing are manufactured according to standard tolerances. The tightness of the fit between the inner ring and the shaft, and the outer ring and the seat hole can only be achieved by controlling the tolerance of the j... read more
Whether the bearing is installed well or not will affect the accuracy, life and performance of the bearing. Therefore, please fully study the installation of the bearing, that is, please install the bearing in accordance with the operating standards including the following items.1. Cleaning the bear... read more
According to the data that the rotor needs to be adjusted, the thickness of the lower half of the pad adjustment gasket needs to be adjusted.For example: if you want to raise the rotor by 0.20mm, you must replace the left and right adjustment shims in the lower half with shims that are 0.20×0.7 = 0.... read more
The main steps of tilting pad bearing adjustmentAccording to the data that the rotor needs to be adjusted, the thickness of the lower half of the pad adjustment gasket needs to be adjusted.For example: if you want to raise the rotor by 0.20mm, you must replace the left and right adjustment shims in ... read more
2. Install the bearingWhen the vibration motor is replaced with a new bearing, the same bearing as the original model must be used.(1) Wash the bearing with kerosene, press it into the bearing seat, fill the rollers of the outer ring of the bearing with Shell No. 3 lithium base grease to two-thirds ... read more