• How to prevent high temperature bearings from rusting?

    How to prevent high temperature bearings from rusting?

    1. Apply anti-rust oil to prevent high temperature bearing rust 2. Immersion method: Some small high-temperature bearings are immersed in anti-rust grease. The thickness of the oil film can be achieved by controlling the temperature or viscosity of the anti-rust grease. A method of sticking a layer ... read more

    Aug 31,2020 News
  • What is the cause of high temperature bearing corrosion?

    What is the cause of high temperature bearing corrosion?

    The cause of high-temperature bearing corrosion and the determination of prevention methods firstly depends on what causes the high-temperature bearing corrosion, which is generally divided into external and internal causes. In summary: 1. Surface finish of high temperature bearing metal (poor oxyge... read more

    Aug 24,2020 News
  • Do you know the advantages of stainless steel self-aligning ball bearings?

    Do you know the advantages of stainless steel self-aligning ball bearings?

    The stainless steel self-aligning ball bearing has two rows of balls and a curved raceway in the outer ring. Therefore, the stainless steel bearing can be self-aligned and can withstand the angular error between the shaft and the bearing seat. It is especially suitable for working conditions that ar... read more

    Aug 17,2020 News
  • How to install the tapered bore bearing on the cylindrical shaft?

    How to install the tapered bore bearing on the cylindrical shaft?

    1. An adapter sleeve installed close to the shaft shoulder needs a spacer sleeve, and its design should enable the adapter sleeve to move in its concave space so that the bearing and the spacer sleeve have good contact. If a straight shaft without shoulder is used, the adapter sleeve should be place... read more

    Aug 11,2020 News
  • How to reduce the wear of stainless steel bearings in machine tools?

    How to reduce the wear of stainless steel bearings in machine tools?

    1. The axial clearance of the stainless steel bearing of the machine tool should be reasonably grasped: In the operation of the equipment, in order to minimize the axial pressure fluctuation of the stainless steel bearing. If conditions permit, you can configure corresponding control equipment. For ... read more

    Aug 03,2020 News