The safeguard measures and methods for bearing life are to wash the sweat on hand and remove the sweat oil from hand directly when using the hand to pick up the oil free SKF Bearing. After that, we should pay attention to rust prevention in rainy season and summer season. Under some special operating conditions, angular contact ball bearings can get longer than traditional computing life, especially in light load conditions. These special operation conditions are that the rolling surface (track and rolling part) is effectively separated by a lubricating oil film and the surface damage caused by pollutants can be restricted.
In fact, under ideal conditions, the so-called permanent bearing life is possible. Strong punching is not allowed, the hammer is not allowed to strike the bearing directly, and the pressure is not allowed through the rolling body. The raceway surface of angular contact ball bearing a rotation, the inner ring and the outer ring, and the rolling body is rolling contact, and running track to the dark side, the running track of the raceway surface does not belong to abnormal, which can be found in the load condition, so when removing oil free bearing, please pay attention to and strictly to observe the running track of the raceway surface.
The guarantee measures and methods for bearing life, bearing water soluble cutting fluid, users must work hard in the maintenance and management of machine tools, so as to control corrosion and even eliminate corrosion. In order to avoid the corrosion of water on the surface of the metal, it should be often stopped with oil and grease on the machine tool. Bearing in the correct use, can have a long life. If the damage is premature, it is likely to be caused by incorrect selection, improper use or poor smoothness.